Working With Servers In The Domain - Altigen ACM 6.5 Administration Manual

Working with Servers in the Domain

6. Click Apply, then click Close.
Repeat these steps for each server you want to make available to the VoIP domain. To
actually add a server to the domain using Enterprise Manager, see "Adding a Server to
a VoIP Domain" on page 359.
Working with Servers in the Domain
In the Global Server Location panel in Enterprise Manager, you can add a server to the
VoIP domain by using the Add button in the panel, remove a selected server from the
VoIP domain by using the Remove button, and you can set the master server, by
selecting a server and clicking the Set as Master button. Before you can add a server
to the VoIP domain, you must have declared it in MaxAdmin (see "Declaring Additional
Servers for the VoIP Domain" on page 357). These are the fields in the Global Server
Location panel:
Parameter
Domain Name
Server ID Length
Global Server
Location
358
MAXCS ACM 6.5 Administration Manual
Description
The name of the VoIP domain.
Length is from 1-3. See "Changing the Server ID
Length" on page 359 for detailed information.
Displays the ID, Name, and Status (active/inactive)
of the servers in the VoIP domain.
Master—One Domain system must be assigned as
Domain Master to propagate configuration data to
member MAXCSs. The master acts as a central
server to accept the connection, synchronize change
from one site to the other sites, and authenticate
users.