Selecting Trunks To Set Attributes - Altigen ACM 6.5 Administration Manual

Selecting Trunks to Set Attributes

The Trunk Configuration window opens:
Figure 3. Trunk Configuration, General tab
Selecting Trunks to Set Attributes
The title bar of the Trunk Configuration window displays the card and the channel of the
selected trunk.
The list on the left shows all the configured trunks. The Location format is the same as
in the Trunk View window, that is, Logical Board ID : Channel Number. The logical board
ID is assigned by the system. This ID may change when a telephony board is added into
or removed from the system.
When you select a trunk in this list, the options and parameters for the trunk appear in
the settings in the right side of the window.
MAXCS ACM 6.5 Administration Manual 123