Monitor Status, Configure Addresses For Enterprise And Vm Servers - Altigen ACM 6.5 Administration Manual

Monitor Status, Configure Addresses for Enterprise and VM Servers

Figure 4. Enabling VM server NAT support
1. Check Enable VM Server NAT Support.
2. Check Enable Virtual IP Addresses Support.
3. Click the Advanced button.
4. Double-click the VM Server IP address to configure the address.
Monitor Status, Configure Addresses for Enterprise
and VM Servers
You can monitor the status and configure the addresses of the Enterprise server and the
Voice Mail server. To do so, in MaxAdministrator, select System > Softswitch
Component Management > Applications Server tab.
386
MAXCS ACM 6.5 Administration Manual