Country-Relevant Settings; Setting Toll Call Prefixes - Altigen ACM 6.5 Administration Manual

Country-Relevant Settings

The Country Relevant tab in the System Configuration window contains group boxes
for setting toll call prefixes and emergency numbers.
The Country field displays the country selected on the System Configuration, General
tab.
Figure 14. System Configuration, Country Relevant tab

Setting Toll Call Prefixes

MAXCS uses Toll Call Prefixes to determine the type of outside call and imposes
restrictions when necessary. For example, if the international toll call prefix is 011 and
a user attempts to make an international call from an extension without international call
privileges, the call will be terminated as soon as the user dials 011 after the trunk or
route access number. The caller hears an error tone.
The toll prefixes set here should match the dialing plan prefixes for the country set in
the General tab (see "Setting General Parameters" on page 46). You can set the
following toll call prefixes.
Domestic. The dialing plan for your country's domestic long distance prefix. For
•
example, type in a 1 for 1-plus dialing within the U.S. dialing plan (also known as
the North American Numbering Plan).
International. The prefix used for international calls. For example, this is 011 for
•
international calls made in the U.S.
Country-Relevant Settings
If your system is
not in North
America, The
Automatic
Dialing Plan
Rules button is
available.
MAXCS ACM 6.5 Administration Manual 65