Left running head:
Chapter name (automatic)
Configure
3. Set Internal Mapping. This allows you to configure a DNAT with host IP address or
an IP address pool.
•
Select Host radio button.
i.
ii. Configure port number for a DNAT by selecting Port check box. Enter the
•
Select Pool radio button.
i.
ii. Configure port number for a DNAT by selecting Port check box. Enter the
4. Click Apply to configure NAT rules for the newly created DNAT policy or Cancel
to return to the NAT Policy page.
Address and Port Translation
Figure 95: Firewall: NAT - Destination NAT Configuration - NAT Rule -
Address & Port Translation
164
Beta
Enter the IP address of the host in the Host IP field.
port number. The range for the port is 1-65535. This is optional.
Select the list name from the Pool Name list.
port number. The range for the port is 1-65535. This is optional.
Alcatel-Lucent
Web GUI Users Guide
Beta