Left running head:
Chapter name (automatic)
Configure
2. Enable policing.
Select the Enable Policing check box.
3. Select and set the policing parameters. This configures the policer on the
particular traffic-class of the policy map.
There are three Police Parameters available: Committed Rate, Committed
Burst, and Excess Burst.
i.
Select Committed Rate option in the Police Parameters box. The
Committed Rate Parameters fields are displayed as shown below.
Figure 167: Quality of Service: Policy Map - New Traffic Class Policing
Configuration – Committed Rate
258
Beta
Alcatel-Lucent
Web GUI Users Guide
Beta