Logon To Usgm - Alcatel-Lucent OmniAccess 700 User Manual

L USGM
OGON TO
The web interface is launched with the login page.
Step 1: Enter the user name and the password in the User Name and Password
fields.
Use the default 'superadmin' user account or use the AAA user name and
password configured using the CLI to login to USGM.
(For more information on configuring AAA user name and password, refer
to the note given below.)
Figure 1: Logon to USGM
Note: To enable AAA services on your system, enter the command aaa services in
configuration mode.
ALU (config)# aaa services
Establish authentication to new users by configuring new user accounts. To configure
new user account, use the following command:
username <user-name> {password [5] <password>|nopassword|
secret [5] <password>}
Example:
ALU (config)# username user1 password pass1
Web GUI Users Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Alcatel-Lucent
Launching the GUI
7
Beta