Management Utilities: File Transfer & Access - Alcatel-Lucent OmniAccess 700 User Manual

Left running head:
Chapter name (automatic)
Configure
F T A
ILE RANSFER AND CCESS
This page displays the protocols supported to access the device and for file
transfer.
It allows you to enable/disable the access protocols such as HTTP, HTTPS, SSH,
Telnet, and SNMP to access the OA-700.(SSH/Telnet to access CLI, HTTP/
HTTPS for Web based management and SNMP service.)
Note: SSH and HTTPS are not supported in the no crypto image. For information on
the no crypto release, refer to the release note.
V F
IEWING ILE
Step 1: From the USGM menu bar, click Configure. All submenu/links under
Configure are displayed in the left navigation panel.
Step 2: Click System Access sub-menu.
System Access page has three tabs: SNMP, Syslog, and File Transfer &
Access. Click File Transfer & Access tab.
File Transfer and Access page is displayed. File Transfer Protocol Status table
displays the protocols that are supported for file transfer. The Access Status
table provides an option to enable/disable the access protocols.
Figure 57: Management Utilities: File Transfer & Access
E /D
NABLE ISABLE THE
Follow the procedure below to enable/disable the access protocols.
Step 1: Select the HTTP/HTTPS/SSH/Telnet/SNMP check box, and click Apply
to enable the protocols for file transfer and access. Multiple options can be
selected.
Step 2: Uncheck the required check box to disable the support of a specific
access protocol.
110
Beta
T & A
RANSFER CCESS
S A
UPPORT OF CCESS
Alcatel-Lucent
P
ROTOCOLS
Beta
Web GUI Users Guide