Traffic Classification: New Match List Rule - Icmp - Alcatel-Lucent OmniAccess 700 User Manual

5. Select the type of traffic.
Check the Type check box to apply rule to the type of traffic. Select the type of
traffic from the list: FTP, NORMAL, RPC, TFTP or SIP.
6. Define rule based on packet length.
Check the Length check box to apply rule based on the packet length.
Specify the length or length range between 0 and 1500. You have the option
to apply the rule for sizes greater than (GT), greater than or equal to (GE),
less than (LT), less than or equal to (LE), between the range (RANGE), or for
the fixed length (FIXED).
7. Apply rule based on source.
Check the From (Source Port) check box to apply rule based on source.
Select from the following options: RPC-PORTMAP, SNMP, SNMPTRAP,
TFTP, DNS, GT, GE, LT, LE, RANGE, NFS, SIP.
8. Apply rule based on destination.
Check the Service (Destination Port) check box apply rule based on
destination. Select from the following options: RPC-PORTMAP, SNMP,
SNMPTRAP, TFTP, DNS, GT, GE, LT, LE, RANGE, NFS, SIP.
R E
ULE LEMENTS FOR
Figure 69: Traffic Classification: New Match List Rule - ICMP
Web GUI Users Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
ICMP
Alcatel-Lucent
Configure
131
Beta