Quality Of Service: Interface Association - Attach Interface - Alcatel-Lucent OmniAccess 700 User Manual

Left running head:
Chapter name (automatic)
Configure
A
TTACHING
Notes:
1. An interface can have only one policy map attached in a direction.
2. When a policy map is attached in the ingress direction on an interface, then only
police and mark attributes will be used.
3. When a policy map is attached in the egress direction on an interface, then shape,
priority, mark, and queue-limit attributes will be used.
Follow the procedure given below to attach a policy map to an interface:
Step 1: From the Interface Association page, click Attach Interface to attach a
policy map to an interface.
Fields to select interface, select policy map, and to set the direction will be
populated.
Figure 174: Quality of Service: Interface Association - Attach Interface
Step 2: Select the available interface from the Interface list.
Step 3: Select the policy map from the Policy Map list.
Step 4: Set the ingress or egress direction (IN or OUT) from the Direction drop-
down list.
Step 5: Click Apply to attach selected policy map to selected interface or click
Cancel to cancel the operation.
Note: 1. You cannot attach a QoS policy (in the egress direction) to a serial interface, which
has MLPPP/MLFR encapsulation.
2. You cannot attach a QoS policy having four levels of hierarchy on a FR interface.
3. You cannot attach a policy map on the tunnel interface in the ingress
270
Beta
P M I
OLICY AP TO AN NTERFACE
Alcatel-Lucent
direction.
Web GUI Users Guide
Beta