Interfaces - Loopback Configuration - Alcatel-Lucent OmniAccess 700 User Manual

C L
ONFIGURE
Follow the procedure below to configure Loopback interface.
Step 1: On the Interfaces page, click Configure icon for the Loopback interface
to be configured. Configuring Loopback page is displayed in the Center Panel.
Figure 32: Interfaces - Loopback Configuration
Step 2: The primary address configured for the interface is displayed in the Basic
box.
1. IP address and the description configured for the interface is displayed in their
respective fields.
2. VRF Forwarding displays the VRF configured. To remove the VRF, click Remove.
3. Make the changes and click Apply or click Reset to retain the original details.
Web GUI Users Guide
Beta
I
OOPBACK NTERFACE
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Configure
61
Beta