Intrusion Prevention: Signature Policies - New - Alcatel-Lucent OmniAccess 700 User Manual

Left running head:
Chapter name (automatic)
Configure
C
ONFIGURING
Follow the procedure below to configure signature policy.
Step 1: From the Signature Policies page, click New. Signature Configuration
page is displayed.
Figure 143: Intrusion Prevention: Signature Policies - New
Step 2: Sensor type displays the intrusion sensor. This is not editable.
Step 3: Enter the signature ID in the SID field.
Step 4: Chose enabled or disabled in the Enable field. Based on the selected
option, the signature is enabled or disabled.
Step 5: Enter the contents for the signature rule (policy) in the Contents field
under the Rule Content box.
Step 6: Click Update to add the new signature rule or click Cancel to cancel
adding new rule.
E S
DITING IGNATURE
1. From the Signature Policies page, click Edit icon in the Action column against
the Signature Policy you want to edit. Signature Configuration page is
displayed.
2. Change the Signature Policy parameters. The Sensor Type and the SID cannot
be modified.
3. Click Apply to save changes or Cancel to retain the original values and to return
to Signature Policy page.
226
Beta
S P
IGNATURE OLICY
P
OLICY
Alcatel-Lucent
Web GUI Users Guide
Beta