Firewall: Firewall Policy - Attach Interface - Alcatel-Lucent OmniAccess 700 User Manual

Left running head:
Chapter name (automatic)
Configure
A F
TTACH IREWALL TO AN
Step 1: Select the firewall policy from the firewall list.
Step 2: Click Attach Interface in the Interface Bindings table.
Fields to attach an interface is populated as shown below.
Figure 107: Firewall: Firewall Policy - Attach Interface
Step 3: Select the interface from the Interface list
Step 4: Select the direction IN/OUT.
Step 5: Click Attach to attach the selected interface to the firewall policy.
D F
ELETING
1. Click Delete icon in the Action column against the Firewall Policy to be deleted.
2. Confirm at the prompt to delete the selected firewall policy.
Note: To delete the firewall policy, detach the firewall policy from the interface and/or
disassociate the DOS attack policy or time range.
E F
DITING IREWALL
1. Select the firewall policy from the Firewall Policy Name list.
Rules already configured (DOS Attack/Intrusion rules) for the selected firewall
policy is displayed in DOS Attack Rule/Intrusion Rule Configuration table.
2. Click Edit icon in the Action column for the firewall policy rule to be edited.
3. Enter the new firewall policy rule parameters in the respective columns.
4. Click Apply to save the changes or Cancel to retain original parameters.
182
Beta
I
NTERFACE
P
IREWALL OLICY
P R
OLICY ULE
Alcatel-Lucent
Web GUI Users Guide
Beta