Interfaces - Configure Ppp Encapsulation On A Channelized Serial Interface - Advanced Options - Alcatel-Lucent OmniAccess 700 User Manual

6. On some links, it may be desirable to require a peer to authenticate itself before
allowing network-layer protocol packets to be exchanged. To enable this
authentication, PPP supports authentication protocols such as PAP, CHAP, EAP
(CHAP - Challenge Authentication Protocol, PAP - Password Authentication
Protocol, EAP - Extensible Authentication Protocol). Authentication is not
mandatory.
Set the authentication protocol for authenticating the peer by selecting the option
from PPP Authentication drop-down list: Chap/Pap/Eap/None
• You can set the credentials for PPP authentication on either the server side or
client side. Select the Use below credentials for client/Use below
credentials for server check box to enter the user name and password on
the client side/server side.
i.
• Selecting None option for PPP authentication removes the authentication
protocol for authenticating the peer.
Note: Server side credentials are mandatory for CHAP/PAP/EAP authentication protocol.
7. Click Advanced Options to initiate LCP negotiation on a PPP encapsulation and
configure PPP Timers. The following page is displayed:
Figure 18: Interfaces - Configure PPP Encapsulation on a Channelized Serial
Interface - Advanced Options
Web GUI Users Guide
Beta
Enter the user name and the password in the User Name and Password
fields. Confirm password in the Confirm Password field.
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Configure
35
Beta