Policy Based Routing - Attach Interface - Alcatel-Lucent OmniAccess 700 User Manual

Left running head:
Chapter name (automatic)
Configure
Figure 51: Policy Based Routing - Attach Interface
Step 2: The Policy Name field displays the name of the IP policy. This is not
editable.
Step 3: Click Attach.
Step 4: Field to attach interface is populated. Select the interface from the
Interface list
Step 5: Click Apply to attach the selected interface to the IP policy or click
Cancel to cancel the operation.
D IP P
ETACH
1. Select the IP Policy from the Policy list. Click Attach Interface icon.
Interface/interfaces already bound to the selected filter is displayed in Attach
Interface page.
2. Click Detach icon in the Action column to detach the IP policy from the selected
interface.
3. Confirm at the prompt to detach the IP Policy.
D IP P
ELETING
1. Click Delete icon in the Action column against the IP Policy to be deleted.
2. Confirm at the prompt to delete the IP Policy.
98
Beta
I
OLICY FROM AN NTERFACE
OLICY
Alcatel-Lucent
Web GUI Users Guide
Beta