Left running head:
Chapter name (automatic)
Configure
C
T
REATING
By default, a transform set 'default' is created in your system, and cannot be
edited or deleted.
Follow the procedure below to create a new transform set.
Step 1: Click New in the Transform Sets page to create a new transform set.
The fields to add name and encapsulation for transform set are populated.
Figure 131: VPN IPsec: New Transform Set
Step 2: Enter the name for the transform set.
The Transform Set name can be any alphanumeric name not exceeding 128
characters.
Step 3: Select the encapsulation.
The default encapsulation is esp-sha1-aes128. A maximum of four
encapsulations can be assigned for a transform set. The system prompts if more
than four encapsulations are selected.
Step 4: Click Apply to add new transform set, or Cancel return to transform set
page.
208
Beta
S
RANSFORM
ET
Alcatel-Lucent
Web GUI Users Guide
Beta