Firewall: Firewall Policy - Add New Intrusion Rule - Alcatel-Lucent OmniAccess 700 User Manual

A I
DDING NTRUSION
Note: You need to configure the Intrusion Prevention settings prior to adding intrusion rule to
the firewall policy.
For more information on the procedure to configure intrusion prevention settings and
view intrusion prevention configuration status, see
1. Click Intrusion Rules radio button for configuring Intrusion rule to the firewall.
2. Fields to add new intrusion rule is populated in the Intrusion Rule Configuration
table.
Figure 106: Firewall: Firewall Policy - Add New Intrusion Rule
3. Enter rule number, select match-list, sensor name, enter Threshold/Packets and
Threshold/Milli Sec, and select mode.
Threshold/Packets and Threshold/Milli Sec values are not mandatory.
4. Click Apply to add new intrusion rule.
5. Add as many rules as required.
Web GUI Users Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
R F
ULE TO THE IREWALL
Alcatel-Lucent
P
OLICY
"Intrusion Prevention"
Beta
Configure
section.
181