Vpn Ipsec - Alcatel-Lucent OmniAccess 700 User Manual

Left running head:
Chapter name (automatic)
Configure
VPN IP
SEC
Note: IPsec VPN is not supported in the no crypto image. For information on the no
crypto release, refer to the release note.
This page allows you to configure IPsec policy using the IPsec Wizard.
The page also provides provision to also add/edit the IPsec VPN parameters like
Preshared Keys,
Note: The basic security package provides IPsec functionality having lower encryption (upto
64bit) algorithms only. It uses DES for encryption and MD5/SHA1 for authentication.
To use advanced encryption algorithms namely 3DES, AES, IPsec license is required.
For more information on how to install the license, refer to
section in this guide.
IP C W
SEC ONFIGURATION
VPN (IPsec) Wizard allows you to configure VPN (IPsec) policies using VPN
(IPsec) Profiles (Tunnel Interface only) or Crypto-map (other interfaces) in a few
easy steps.
VPN (IPsec) Wizard configures the following:
•
Creates Crypto-map or IPsec profiles with Tunnel Interface.
•
For Crypto-map, creates VPN Peers, VPN Traffic to be tunneled using Match-lists
and associate Interfaces.
•
For IPsec Profiles, creates VPN Peers and associates IPsec Profiles to the
created Tunnel Interfaces.
•
IKE settings for configuring PFS, Lifetime, security proposals
•
VPN (IPsec) settings for configuring PFS, lifetime and transform set
184
Beta
IKE Policy, and Transform
IZARD
Alcatel-Lucent
Set.
""License Management"
Web GUI Users Guide
Beta