D Auto Tuning Step Function; D Band Edge Warning Beep; Volume Setting - Icom IC-7000 Instruction Manual

3
BASIC OPERATION

D Auto tuning step function

When rotating the tuning dial rapidly, the tuning
speed accelerates automatically as selected.
q Push [AF( )] momentarily to enter the Set
set
mode menu.
w Push [F-4 OTH] to enter the miscellaneous
(others) Set mode.
e Push [F-1 ≤] or [F-2 ≥] to select "MAIN DIAL
Auto TS."
r Rotate [DIAL] to select the desired tuning speed
from high, low and OFF.
• HIGH : Approx. 5 times faster when the tuning step
is set to 1 kHz or smaller steps; approx. 2
times faster when the tuning step is set to 5
kHz or larger.
• LOW : Approx. 2 times faster
• OFF : Auto tuning step is turned OFF
• Hold down [F-4 DEF] for 1 second to return to default
setting.
t Push [Z(
menu/grp
operating mode.

D Band edge warning beep

When selecting a frequency that lies outside of a
band's specified frequency range, a warning beep
sounds.
This function can be turned OFF in Set mode, if
desired.
q Enter the miscellaneous (others) Set mode as
above.
w Push [F-1 ≤] or [F-2 ≥] to select "Beep (Band
Edge)," then rotate [DIAL] to select the desired
setting.
• Hold down [F-4 DEF] for 1 second to return to default
setting.
e Push [Z(
menu/grp
operating mode.

■ Volume setting

R o t a t e [ A F ] c o n t r o l c l o ck w i s e t o i n c r e a s e ;
counterclockwise to decrease the audio output level.
• Set a suitable audio level.
Audio output
decreases
33
)] twice to return to the normal
)] twice to return the normal
Audio output
increases
[AF]
[MENU/GRP] [F-1] [F-2] [F-4]
[AF]
[DIAL]