D Semi Break-In Operation; D Full Break-In Operation - Icom IC-7000 Instruction Manual

6
FUNCTIONS FOR TRANSMIT
■ Break-in function
The break-in function is used in CW mode to
automatically switch the transceiver between transmit
and receive when keying. The IC-7000 is capable of
full break-in or semi break-in.

D Semi break-in operation

During semi break-in operation, the transceiver
selects transmit when keying, then automatically
returns to receive after a pre-set time from when you
stop keying.
• Semi break-in operation
q Push [MODE] to select CW or CW-R mode.
w Select M-3.
• Hold down [MENU/GRP] for 1 second once or twice
to select the menu group M.
• Push [MENU/GRP] momentarily one or more times
to select the menu M-3.
e Push [F-1 BRK] once or twice to turn the semi
break-in function ON.
• " " appears.
[MENU/GRP]
When using a paddle, set "Key Speed" in the
quick Set mode to adjust the keying speed. (p. 122)

D Full break-in operation

During full break-in operation, the transceiver
automatically switches to receive between keying
dots and dashes so that the operator can hear
activity on the channel when transmitting.
[MENU/GRP]
85
Appears
[F-1]
Appears
[F-1]
• Break-in delay setting
q Push [MODE] to select CW or CW-R mode.
w Select M-3.
e Hold down [F-1 BRK] for 1 second to enter the
break-in delay time Set mode.
r Rotate [DIAL] to set the break-in delay time (the
delay from transmit to receive).
[MENU/GRP] [F-1]
q Push [MODE] to select CW or CW-R mode.
w Select M-3.
• Hold down [MENU/GRP] for 1 second once or twice
to select the menu group M.
• Push [MENU/GRP] momentarily one or more times
to select the menu M-3.
e Push [F-1 BRK] once or twice to turn the full
break-in function ON.
• " " appears.
When using a paddle, set "Key Speed" in the
quick Set mode to adjust the keying speed. (p. 122)
[DIAL]