D Storing A Non Standard Repeater - Icom IC-7000 Instruction Manual

D Storing a non standard repeater

[F-1]
[MENU/GRP] [F-2] [F-3] [F-4]
q Tur n the auto repeater function OFF in the
miscellaneous (others) Set mode. (p. 130)
w Push [MODE] to select FM mode.
e Select M-2.
• Hold down [MENU/GRP] for 1 second once or twice
to select the menu group M.
• Push [MENU/GRP] momentarily one or more times
to select the menu M-2.
r Push [F-4 V/M] to select VFO mode.
t Select M-1, then push [F-2 A/B] to select VFO A.
y Rotate [DIAL] to set the receive frequency
(repeater output frequency).
u Push [F-2 A/B] to select VFO B.
i Rotate [DIAL] to set the transmit frequency
(repeater input frequency).
o Push [F-2 A/B] to select VFO A.
!0 Push [F-1 SPL] to turn the split function ON.
• " " appears.
!1 Select M-3, then push [F-3 TON] to turn on the
previously set tone encoder ON. (p. 64)
!2 Rotate [M-ch] to select the desired memory
channel.
• " " appears when the blank channel is selected.
!3 Select M-2, then hold down [F-2 MW] for 1 second
to store the contents in the selected memory
channel.
[DIAL]
RECEIVE AND TRANSMIT
Set the frequency.
Select
Set the frequency.
Select
Appears
SPL
Push
Appears
Selected M3, then
TON
push
Rotate
Select
Selected M2, then
MW
push
4
4
66