D Convenient Functions For Receive - Icom IC-7000 Instruction Manual

D Convenient functions for receive

• Preamp and attenuator (p. 72)
➥ Push [P�AMP/ATT] momentarily to turn the
preamp ON or OFF.
• " " appears when the preamp is set to ON.
➥ Hold down [P�AMP/ATT] for 1 second to turn the
attenuator ON.
• P u s h [ P� A M P / AT T ] m o m e n t a r i l y t o t u r n t h e
attenuator OFF.
• " " appears when the attenuator is set to ON.
• Twin PBT (passband tuning) (p. 77)
➥ Push [PBT/M-ch/RIT] (switch) momentarily once
or twice to select the twin PBT ON or OFF (M-ch
RIT).
• PBT indicator lights green when the twin PBT is
selected.
➥ Rotate [PBT/M-ch/RIT] (controls–inner/outer).
• Push [PBT/M-ch/RIT(
• AGC (auto gain control) (p. 74)
➥ While "M -3 " is selected, push [F-3 A G C ]
momentarily one or more times to select AGC
fast, AGC middle and AGC slow.
• Hold down [MENU/GRP] for 1 second once or twice
to select the menu group M.
• Push [MENU/GRP] momentarily one or more times
to select the menu M-3.
• " ," " " and "
fast time constant, middle time constant and slow
time constant is selected, respectively.
➥ While "M-3" is selected, hold down [F-3 AGC] for
1 second to enter the AGC Set mode.
• Push [F-2 FAST], [F-3 MID] or [F-4 SLOW] to
select the time constant, then rotate [DIAL] to adjust
the time constant.
)] to clear the settings.
clr
" appears when the
RECEIVE AND TRANSMIT
• Noise blanker (p. 78)
➥ Push [NB/ADJ] to turn the noise blanker ON or
OFF.
• " " appears when the noise blanker is set to ON.
➥ Hold down [NB/ADJ] for 1 second to enter the
noise blanker Set mode, then rotate [DIAL] to
adjust the threshold level, or noise pulse width.
• DSP noise reduction (p. 79)
➥ Push [NR/LEV] to turn the DSP noise reduction
ON or OFF.
• " " appears when the DSP noise reduction is set
to ON.
➥ Hold down [NR/LEV] for 1 second to enter the
noise reduction level Set mode, then rotate
[DIAL] to adjust the DSP noise reduction level.
• Manual notch filter (pp. 80, 82)
➥ Push [MNF/ADJ] to turn the manual notch filter
ON or OFF.
• " " appears when the manual notch filter is set to
ON.
➥ Hold down [MNF/ADJ] for 1 second to enter the
manual notch filter Set mode.
• Push [F-2 NF1], [F-3 NF2] to select the notch filter,
push [F-4 NW] to set the filter width, rotate [DIAL] to
set the attenuated frequency.
• ⁄ function (p. 32)
1
4
➥ While "M-3" is selected, push [F-2 1/4] to turn
the ⁄ function ON or OFF.
1
4
• " " indicator appears when the function is activated.
4
52