D Menu S-3 Functions; D Menu G-1 (Scope) Functions - Icom IC-7000 Instruction Manual

D Menu S-3 functions

MW MPW
F-1 F-2
MEMORY WRITE (pp. 101, 102)
Hold down for 1 second to store the dis-
MW
played VFO frequency and operating
F-1
mode into the selected memory channel.
MEMO PAD WRITE (p. 109)
Push to store the displayed VFO fre-
MPW
quency and operating mode into a memo
F-2
pad.
MEMO PAD READ (p. 110)
Push to call up a memo pad.
MPR
F-3
✔ What is the memo pad function?
The memo pad function stores the frequency and operating
mode for easy recall. The memo pads are separate from the
usual memory channels. The default number of memo pads
is 5, however, this can be increased to 10 in the miscella-
neous (others) Set mode. (p. 132)
MPR
F-3 F-4
PANEL DESCRIPTION

D Menu G-1 (Scope) functions

SPN HLD
F-1 F-2
SWEEP STEPS (pp. 70, 71)
➥ Push momentarily to change the sweep
SPN
step.
F-1
• Available steps are ±10, 25, 50, 100 and 250
kHz.
➥ Hold down for 1 second to change the
sweep steps to ±10 kHz.
PEAK HOLD (pp. 70, 71)
➥ Push to freeze the current simple band
HLD
scope display.
F-2
• "H" indicator appears while the function is in
use.
➥ Hold down for 1 second to clear the peak
levels.
• Peak levels are displayed in the background
on the simple band scope display. The peak
hold function can be disabled in the scope
Set mode. (p. 71)
FIX/CENTER SELECTION (pp. 70, 71)
➥ Push to toggle the simple band scope fix
FIX
mode and center mode.
F-3
• Fix mode:
Rotating [DIAL] leaves the marker centered.
• Center mode:
Rotating [DIAL] moves the edge frequen-
cies.
➥ During fix mode operation, hold down for
1 second to set the displayed frequency
to that of the marker.
SWEEP SPEED
➥ Push momentarily to change the sweep
SPD
speed between Fast and Slow. (pp. 70,
F-4
71)
➥ Hold down for 1 second to enter the
scope Set mode. (p. 71)
1
FIX SPD
F-3 F-4
1
8