Display Set Mode; Contrast (Lcd); Bright (Lcd); Lcd Unit Bright - Icom IC-7000 Instruction Manual

■ Display Set mode

To adjust the LCD contrast or backlight, wait until
the LCD becomes stable (10 min. or more after
turning power ON). This is an inherent characteris-
tic of LCDs and LCD backlights and does not indi-
cate a transceiver malfunction.

1 Contrast (LCD)

This item adjusts the contrast of the LCD from 0% to
100% in 1% steps.

2 Bright (LCD)

This item adjusts the brightness of the LCD from 0%
to 100% in 1% steps.

3 LCD Unit Bright

This item adjusts the brightness of the LCD unit from
0% to 100% in 1% steps.

4 LCD Flicker

This item adjusts the flicker of the LCD from 0% to
100% in 1% steps.
Icom recommends using the default value. But if
you find the LCD flicker objectionable, adjust this
item.
5 Backlight(Switches)
This item adjusts the brightness of the switches from
0% to 100% in 1% steps.

6 Display Type

This item sets the LCD screen type. There are 3
selectable types: A (Black-background), B (White-
background), and C (Blue-background).
SET MODE
4 0 %
40% (default)
7 0 %
70% (default)
4 0 %
40% (default)
6 5 %
65% (default)
5 0 %
50% (default)
A
A-type LCD screen (default)
13
13
124