Sending A Recorded Message; D Transmit Level Setting - Icom IC-7000 Instruction Manual

■ Sending a recorded message

q Select S-1.
w Push [F-1 VO] to call up the voice recorder menu.
• If the receive voice memor y channels screen
appears, push [Z(
menu / grp
select the transmit voice memory channel.
• If the voice root menu appears, push [F-2 TX] to
select the transmit voice memory menu. The voice
recorder star ting menu can be changed in the
miscellaneous (others) Set mode.
e Push [F-1 T1] — [F-4 T4] to transmit the
contents.
• "T1"– "T4" are highlighted while transmitting.
r Push the selected memory channel key, [F-1 T1]
— [F-4 T4], again to stop, if desired.
t Push [Z(
menu/grp
memory screen.
For your information
When an external keypad is connected to the pin
2 and pin 7 of the [MIC] connecter, the recorded
message, T1–T4, can be transmitted without
opening the voice recorder set screen.
See page 135 for details.

D Transmit level setting

q Call up the voice memory recording mode as
described in steps q to w as above.
w Push [Y( )] to select the voice memory
menu/grp
transmit level Set mode.
e Push the desired memory channel key, [F-1 T1]
– [F-3 T3], momentarily to transmit the contents.
r Rotate [DIAL] to adjust the transmit voice level.
• Push [F-4 DEF] to select the default condition.
t Push [Z(
m e n u /g r p
recorder screen.
)] then push [F-2 TX] to
)] twice to exit the voice
)] to retur n to the voice
VOICE RECORDER FUNCTIONS
[F-1]
[MENU/GRP] [F-2] [F-3] [F-4]
7
7
98