Table of Contents
Advertisement
Setting the frequency
D About the 1/4 Tuning function
SSB-D, CW, and RTTY modes
With the Tuning Function OFF, turn ON the 1/4 Tuning
function to reduce the tuning speed to 1/4 of the
normal speed, for finer tuning.
1. Push
.
• Opens the FUNCTION screen.
2. Touch [1/4].
3. Push
.
D About the Auto Tuning Step function
The tuning step automatically changes, depending on
the rotation speed of
L You can change the Auto Tuning Step function settings in
the following menu. (p. 8-5)
» SET > Function > MAIN DIAL Auto TS
1/4 Tuning
function is ON.
.
3-4
D Directly entering a frequency
You can set the frequency without rotating
by directly entering it using the keypad.
Entering the operating frequency
1. Touch the MHz digits. (Example: 145)
• Opens the BAND STACKING REGISTER screen.
2. Touch [F-INP].
• Opens the F-INP screen.
3. Start entry with the most significant digit.
L To clear the entry, touch [CE].
L To clear the entry and return to the previous screen,
push
.
4. Touch [ENT] to set the entered frequency. Closes
the F-INP screen.
L If you touch [ENT] when the digits under 100 kHz are
not entered, "0" will be automatically entered into the
digits that are blank.
Entry examples
• 144.680 MHz: [1], [4], [4], [•(−)], [6], [8], [0], [ENT]
• 145.000 MHz: [1], [4], [5] [ENT]
• Changing from 144.680 MHz to 144.540 MHz:
[•(−)], [5], [4], [0], [ENT]
L Touching [•(−)] first enters the same MHz digits as the
operating frequency.
BASIC OPERATION
3
3
Advertisement
Table of Contents
