Function Display - Icom IC-7000 Instruction Manual

1
PANEL DESCRIPTION
• When connecting the ACC conversion cable (OPC-599)
Connect to ACC socket
13
9 10 11 12
5 6 7 8
1 2 3 4

■ Function display

!4
q
w
e
q FREQUENCY READOUT
Displays the operating frequency.
w METER READOUTS
➥ Shows received signal strength while receiving.
➥ Shows either transmit power meter (Po), SWR,
ALC or compression level meter (COM) while
transmitting.
e MULTI-FUNCTION KEY GUIDE
Indicates the function of the multi-function keys.
These alphanumeric readouts show a variety of
information such as current functions of the "F"
keys [F-1] to [F-4].
r SPLIT FREQUENCY READOUT (pp. 89, 90)
Shows the transmit frequency during split operation.
t BLANK MEMORY INDICATOR
Appears when the displayed memory channel is
not programmed (blank channel).
• This indicator appears both in VFO and memory modes.
13
ACC 1
q FSKK
w GND
e HSEND u 13.8 V
r MOD
!3 !2 !1 !0
o
i
u
y
t
r
(p. 151)
(p. 101)
ACC 2
2
5
4
3
1
8
6 7
t AF
q 8 V
y SQLS w GND
e HSEND
i ALC r NC (BAND*)
* See p. 140 for details
@4 @3
!5 a
!6
!7
y MEMORY CHANNEL READOUT
Shows the selected memory channel or scan edge
channel.
• Memory bank indicator (A to E) appears to the left of
memory channel.
• This indicator appears both in VFO and memory modes.
u VFO/MEMORY INDICATORS
➥ VFO A or B appears when VFO mode is selected;
MEMO appears when memory mode is selected.
i VOICE RECODER INDICATORS
REC appears when the digital voice recoder
function is activated.
o LOCK INDICATOR
Appears when the dial lock function is activated.
!0 DIRECT FREQUENCY ENTRY INDICATOR (p. 29)
Appears when the transceiver is ready for direct
frequency entry.
• This indicator appears when [(F-INP)ENT] key on the
HM-151 is pushed.
2
5
4
3
1
6 7
t ALC
y VSEND
u 13.8 V
@2
(p. 100)
(pp. 27, 100)
(p. 94)
(p. 37)
!5 b
@1
@0
!9
!8