Erasing The Recorded Contents - Icom IC-7000 Instruction Manual

7
VOICE RECORDER FUNCTIONS

■ Erasing the recorded contents

The recorded contents can be erased independently
by channel.
q Select S-1.
w Push [F-1 VO] to call up the voice recorder menu.
• If the transmit voice memory channels (T1–T4) screen
appears, push [Z(
select the receive voice memory channel.
• If the voice root menu appears, push [F-1 RX] to
select the receive voice memory menu. The voice
recorder star ting menu can be changed in the
miscellaneous (others) Set mode. (p. 134)
e Push [F-1 ≤] or [F-2 ≥] to select the desired
recorded channel to be erased, then hold down
[F-4 CLR] for 1 second to erase the contents.
r Push [Z(
menu/grp
recoder mode.
Be careful!—the erased contents CANNOT be re-
called.
Erasing a long message takes a little time, and a maximum message length (120 seconds/channel) takes over
1 second.
When resetting the CPU, the transceiver clears all of the voice memory area (1500 seconds), and it takes
almost 30 seconds. In these cases, you can use the record function, but you cannot playback the recorded
contents during the clearing process unitil it is completed.
95
)] then push [F-1 RX] to
menu / grp
)] twice to exit the voice
Menu group selection
Hold down [MENU/GRP] for 1 second.
Selection from: M, S or G(Graphic)
Menu selection (Example: S)
Push [MENU/GRP] momentarily.
Selection from: S-1, S-2 or S-3
[MENU/GRP] [F-1] [F-2] [F-4]
Either Either
Y Y or Z or Z