D One-Touch Voice Recording - Icom IC-7000 Instruction Manual

Hf/vhf/uhf all mode transceiver
Hide thumbs Also See for IC-7000:
Table of Contents

Advertisement

D One-touch voice recording

To record the receiving signal contents immediately,
one-touch voice recording is available.
q Hold down [ANF/• REC] for 1 second while
receiving a signal to start recording.
• "
" blinks.
• Records audio into the new channel.
w Hold down [ANF/• REC] for 1 second again to
stop recording.
• Recording is automatically terminated after 120
seconds or when a total of the recorded time
becomes 1500 seconds.
■ Playing the recorded contents
q Select S-1.
w Push [F-1 VO] to call up the voice recorder menu.
• If the transmit voice memory channels (T1–T4) screen
appears, push [Z(
menu / grp
select the receive voice memory channel.
• If the voice root menu appears, push [F-1 RX] to
select the receive voice memory menu. The voice
recorder star ting menu can be changed in the
miscellaneous (others) Set mode.
e Push [F-1 ≤] or [F-2 ≥] to select the desired
recorded contents, then push [F-3 PLY] to
playback.
• "
" appears.
r Push [F-3 PLY] again (or push [Z(
stop playback, if desired.
• Playback is terminated automatically when all of the
recorded contents in the channel are played.
t Push [Z(
menu/grp
recoder mode.
)] then push [F-1 RX] to
)]) to
menu/grp
)] twice to exit the voice
VOICE RECORDER FUNCTIONS
Blinks
[ANF/•REC]
[MENU/GRP]
[F-1]
[F-2] [F-3]
7
7
94

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents