Operating Mode Selection; Voice Synthesizer Function - Icom IC-7000 Instruction Manual

■ Operating mode selection

The following modes are available in the IC-7000:
SSB (LSB/USB), CW, CW-R (CW reverse), RTTY,
RTTY-R (RTTY reverse), AM, FM and WFM (receive
only).
To select the desired mode of operation, push
[MODE] one or more times, then hold down [MODE]
for 1 second, if necessary. See the diagram at right
for the order of selection.
• The selected mode is indicated in the function display.
[MODE]
NOTE: If a desired mode cannot be selected, it
may be hidden because of a setting in the
miscellaneous (others) Set mode (pp. 134, 135).

■ Voice synthesizer function

The IC-7000 has a voice synthesizer function. This
function announces the S-meter level, operating
frequency and mode (S-meter level's announcement
can be deactivated—p. 132) in a clear, electronically
generated voice, in English (or Japanese).
q Select the desired parameters to be announced,
such as Audio level, speed, language, contents, in
the miscellaneous (others) Set mode. (p. 131)
w Push [SPCH/LOCK] momentarily to announce
the selected contents.
• Push [SPCH/LOCK] momentar ily to stop the
announcement.
OPERATING MODE SELECTION
USB LSB
CW CW-R
RTTY RTTY-R
AM FM WFM
SPCH TUNER
/LOCK /CALL
V/M
F-1
1�8 3�5
1 2
10 14
4 5
21 24
7 8
50 � 144
0
BASIC OPERATION
Push
momentarily
Hold down
for 1 sec.
XFC
MW
F-2
MODE
7
MODE
3
18
FIL
6
28
9 GENE
430
F-INP
CE ENT
HM-151
[SPCH/LOCK]
3
3
34