D Memory Names - Icom IC-7000 Instruction Manual

8
MEMORY OPERATION

D Memory names

All memory channels (including scan edges) can
be tagged with alphanumeric names of up to 9
characters each.
Capital letters, small letters, numerals, some
symbols (! # $ % & ¥ ? " ' ` ^ + – ✱ / . , : ; = < > ( ) [ ] {
_
} | _ @) and spaces can be used.
• Editing (programming) memory names
q Select M-2.
w Push [F-4 V/M] to select memory mode.
e Push [F-1] (MEM, LST) twice to enter the
memory channel list.
r Push [PBT/M-ch/RIT] momentarily to select the
M-ch/RIT function, if the twin PBT is selected.
• [PBT/M-ch/RIT] indicator (Green) goes out.
t Rotate [M-ch] (inner) control to select the desired
memory channel.
• All memory channels including blank channels can be
selected.
• [Y]/[Z] on the microphone also changes the channels.
y Push [F-2 NAM] to edit memory channel name.
• A cursor appears and blinks.
• Memory channel names of blank channels cannot be
edited.
u Push [Y(
menu/grp
desired character group.
• [ABC], [abc], [123] or [etc] indicates the capital
l e t t e r s , s m a l l l e t t e r s , n u m e r a l s o r s y m b o l s ,
respectively
i Input the desired character by rotating [DIAL].
• Push [F-1 Å] or [F-2 Ç] for cursor movement.
• Push [F-3 DEL] to delete the selected character.
• Push [F-4 SPC] to input a space.
• Pushing the HM-151's keypad, [0]–[9], can also enter
numerals.
o Push [Z(
menu/grp
• The cursor disappears.
!0 Repeat steps t to o to program another
memory channel's name, if desired.
!1 Push [Z(
menu/grp
channel list.
105
)] several times to select the
)] to input and set the name.
)] twice to exit the memory
Menu group selection
Hold down [MENU/GRP] for 1 second.
Selection from: M, S or G(Graphic)
Menu selection (Example: M)
Push [MENU/GRP] momentarily.
Selection from: M-1, M-2 or M-3
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[PBT/M-ch/RIT] indicator
[F-1]
[MENU/GRP] [F-2] [F-3] [F-4]
Selected character
Either Either
Y or Z Y Z
or
[DIAL]
NAM
Push
Rotate
Ç
Push