Speech S-Level; Speech [Mode] Switch; Memopad Numbers; Scan Speed - Icom IC-7000 Instruction Manual

■ Miscellaneous (others) Set mode

24 SPEECH S-Level

You can have frequency, mode and signal level an-
nouncement. Signal level announcement can be de-
activated if desired.
When "OFF" is selected, the signal level is not an-
nounced.

25 SPEECH [MODE] Switch

This item selects the operating mode speech capa-
bility when [MODE] is pushed.
When "ON" is selected, the selected operating mode
is announced at pushing [MODE].

26 Memopad Numbers

This item sets the number of memo pad channels
available. 5 or 10 memo pads can be set.

27 SCAN Speed

This item sets the rate at which channels or frequen-
cies are scanned during scan operations. High and
low can be selected.

28 SCAN Resume

This item sets the scan resume function ON or OFF.

29 MAIN DIAL Auto TS

This item sets the auto tuning step function. When
rotating [DIAL] rapidly, the tuning step rate adapts
as selected.
There are 2 type of auto tuning steps: HIGH (Fast-
est) and LOW (Faster).
(continued)
ON
Signal level announcement
(default)
ON
Operating model announce-
ment with [MODE]
5
5 memo pads
(default)
HIGH
Scan is faster.
(default)
Scan resumes 10 seconds after stopping
ON
on a signal (or 2 seconds after a signal
disappear). (default)
OFF Scan does not resume after stopping on
a signal. For the priority watch, setting
to OFF pauses the watch until the signal
disappears and scan resumes.
Auto tuning step is turned ON.
HIGH
Fastest tuning step during rapid rotation
(default)
LOW Auto tuning step is turned ON.
Faster tuning step during rapid rotation
Auto tuning step is turned OFF
OFF
13
SET MODE
OFF
No signal level
announcement
OFF
No operating mode an-
nouncement with [MODE]
(default)
10
10 memo pads
LOW
Scan is slower.
.
13
132