Handling Precautions - Mitsubishi Melsec-Q QD75P1 User Manual

Programmable logic controller q-series

Hide thumbs Also See for Melsec-Q QD75P1:

4 INSTALLATION, WIRING AND MAINTENANCE OF THE PRODUCT

4.1.3 Handling precautions

Use the PLC within the general specifications environment given in this manual.

Using the PLC outside the general specification range environment could lead to electric

shocks, fires, malfunctioning, product damage or deterioration.

Do not directly touch the conductive section and electronic parts of the module.

Failure to observe this could lead to module malfunctioning or trouble.

Make sure that foreign matter, such as cutting chips or wire scraps, do not enter the module.

Failure to observe this could lead to fires, trouble or malfunctioning.

Never disassemble or modify the module.

Failure to observe this could lead to trouble, malfunctioning, injuries or fires.

Handle the QD75 and cable while observing the following precautions.