Mitsubishi Melsec-Q QD75P1 User Manual page 456

11 MANUAL CONTROL
Forward run JOG start signal
Axis stop signal
Fig. 11.11 Operation when the JOG start signal is turned ON immediately after the stop signal OFF
When the "JOG start signal" is turned ON immediately after the stop signal
OFF (within 100ms)
When the "JOG start signal" is turned ON immediately after the stop signal OFF
(within 100ms), it will be ignored and the JOG operation will not be carried out.
ON
[Y8, YA, YC, YE]
OFF
[Y4, Y5, Y6, Y7]
Forward run JOG operation
OFF
ON
100ms
11 - 16
MELSEC-Q
A rise of JOG start signal is ignored.