List Of Block Start Data - Mitsubishi Melsec-Q QD75P1 User Manual

5 DATA USED FOR POSITIONING CONTROL

5.4 List of block start data

2nd point
1st point
Setting item
œ ˆÊ ' u Œ ˆ ‚ ß n " ® ƒ f [ ƒ ^
b15
Da.11 Shape
b15
Da.13 Special start
instruction
2nd point
1st point
Setting item
œ ˆÊ ' u Œ ˆ ‚ ß n " ® ƒ f [ ƒ ^
b15
Da.11 Shape
b15
Da.13 Special start
instruction
The illustrations below show the organization of the block start data stored in the QD75
buffer memory. The block start data setting items
the pages that follow.
50th point
Setting item
Setting item
Buffer memory
address
b8 b7 b0
26000
Da.12 Start data No.
b8 b7 b0
26050
Da.14 Parameter
50th point
Setting item
Setting item
Buffer memory
address
b8 b7 b0
27000
Da.12 Start data No.
b8 b7 b0
27050
Da.14 Parameter
Buffer memory
address
Buffer memory
address
26049
26001
26099
26051
Buffer memory
address
Buffer memory
address
27049
27001
27099
27051
5 - 74
MELSEC-Q
Da.11 Da.14
to are explained in
Up to 50 block start data points can be set
(stored) for each axis in the buffer memory
addresses shown on the left.
Items in a single unit of block start data are
shown included in a bold frame.
Each axis has five start blocks (block Nos.
0 to 4).
For information on the organization of the
buffer memory addresses assigned to the
start blocks 1 to 4, refer to Appendix 12
"List of buffer memory addresses".