Enabling Ssl On The Key Management System (Kms); Server - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

3
Steps for connecting to an SKM or ESKM appliance
17. Select the server certificate name you just created from the certificate list, and select
18. Click Install Certificate.
19. Paste the signed certificate data you copied under Certificate Response and click Save.
Enabling SSL on the Key Management System (KMS) Server
The KMS Server provides the interface to the client. Secure Sockets Layer (SSL) must be enabled
on the KMS Server before this interface will operate. After SSL is enabled on the first appliance it
will be automatically enabled on the other cluster members.
To configure and enable SSL, perform the following steps:
1. Select the Device tab.
2. In the Device Configuration menu, click KMS Server to display the Key Management Services
SKM Key Management Services Configuration window
FIGURE 87
3. In the KMS Server Settings section of the window, select the following check boxes:
140
Properties.
The Certificate Request Information window displays.
The Certificate Installation window displays.
The status of the server certificate should change from Request Pending to Active.
Configuration window.
SKM Key Management Services Configuration window
•
Use SSL
•
Allow Key and Policy Configuration Operations
•
Allow Key Export
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
53-1002721-01