Brocade Communications Systems StoreFabric SN6500B Administrator's Manual page 59

2. Select a switch from the <NO GROUP DEFINED> encryption group. (The switch must not be
3. Select Encryption > Create/Add to Group, from the menu task bar.
The Configure Switch Encryption wizard welcome screen displays
you to create a new encryption group, or add an encryption switch to an existing encryption group.
The wizard also enables you to configure switch encryption.
FIGURE 14
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
53-1002721-01
assigned to an encryption group.)
Click Next on each screen to advance to the next step in the wizard. Steps might vary slightly
depending on the key vault type selected, but the basic wizard steps are as follows.
1. Designate Switch Membership.
2. Create a new encryption group or add a switch to an existing encryption group.
3. Select the key vault.
4. Specify the public key filename.
5. Select Security Settings.
6. Confirm the configuration.
7. Configuration Status.
8. Read Instructions.
Configure Switch Encryption wizard - welcome screen
Creating a new encryption group
(Figure 14). The wizard enables
2
41