High Availability Cluster Configuration; Ha Cluster Configuration Rules - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

Brocade fabric os encryption administrator's guide v7.1.0 (53-1002721-01, march 2013)
Hide thumbs Also See for StoreFabric SN6500B:
Table of Contents

Advertisement

3

High availability cluster configuration

High availability cluster configuration

An HA cluster consists of two encryption engines configured to host the same CryptoTargets and to
provide Active/Standby failover and failback capabilities in a single fabric. Failover is automatic
(not configurable). Failback occurs automatically by default, but is configurable with a manual
failback option. All encryption engines in an encryption group share the same DEK for a disk or
tape LUN.
An HA cluster has the following limitations:
NOTE
The CLI does not allow creation of an HA cluster if the node is not in the encryption group.

HA cluster configuration rules

The following rules apply when configuring an HA cluster:
154
Alternate Master KeyID:
No HA cluster membership
Node Name:
State:
Role:
IP Address:
Certificate:
Current Master Key State:
Current Master KeyID:
Alternate Master Key State:Not configured
Alternate Master KeyID:
EE Slot:
0
SP state:
Current Master KeyID:
Alternate Master KeyID:
No HA cluster membership
The encryption engines that are part of an HA cluster must belong to the same encryption
group and be part of the same fabric.
An HA cluster cannot span fabrics and it cannot provide failover/failback capability within a
fabric transparent to host MPIO software.
All HA cluster configuration and related operations must be performed on the group leader.
Cluster links must be configured before creating an HA cluster. Refer to the section
"Configuring cluster links"
Configuration changes must be committed before they take effect. Any operation related to an
HA cluster that is performed without a commit operation will not survive across switch reboots,
power cycles, CP failover, or HA reboots.
00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
10:00:00:05:1e:39:14:00
DEF_NODE_STATE_DISCOVERED
MemberNode
10.32.244.60
enc1_cpcert.pem
Not configured
00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
Unknown State
00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
on page 133 for instructions.
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
53-1002721-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os 7.1.0

Table of Contents