Brocade Communications Systems StoreFabric SN6500B Administrator's Manual page 86

2
Configuring hosts for encryption targets
FIGURE 43
3. Select a target storage device from the list, then click Hosts.
FIGURE 44
68
NOTE
You can also select a group, switch, or engine from the Encryption Center Devices table, then
click the Targets icon.
The Encryption Targets dialog box displays
Encryption Targets dialog box
The Encryption Target Hosts dialog box displays
configured hosts in a fabric.
The table displays the following information:
•
Port WWN: The world wide name of the host ports that are in the same fabric as the
encryption engine.
•
Node WWN: The world wide name of the host nodes that are in the same fabric as the
encryption engine.
•
Port Name: The name of the hosts that are in the same fabric as the encryption engine.
•
Port ID: Displays the 24-bit port ID (PID) of the host port in both the Host Ports in Fabric
table and the Selected Hosts table.
Encryption Target Hosts dialog box
(Figure 43).
(Figure 44). The Hosts in Fabric table lists the
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
53-1002721-01