3. Click Next.
FIGURE 26
4. For this procedure, select Add this switch to an existing encryption group, then click Next.
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
53-1002721-01
The Designate Switch Membership dialog box displays
Designate Switch Membership dialog box
The Add Switch to Existing Encryption Group dialog box displays
The dialog box contains the following information:
•
Encryption Groups table: Enables you to select an encryption group in which to add a
switch.
•
Member Switches table: Lists the switches in the selected encryption group.
NOTE
If you are creating a new encryption group, refer to
page 40.
Adding a switch to an encryption group
(Figure
26).
(Figure
"Creating a new encryption group"
2
27).
on
51