Brocade Communications Systems StoreFabric SN6500B Administrator's Manual page 303

Brocade fabric os encryption administrator's guide v7.1.0 (53-1002721-01, march 2013)
Hide thumbs Also See for StoreFabric SN6500B:
Table of Contents

Advertisement

TABLE 22
Internal Names
LUN_DIS_LUN_NOT_FOUND
LUN_TGT_OFFLINE
LUN_DIS_NOT_SUPPORTED
LUN_DIS_WRONG_DEV_TYPE
LUN_MEDIUM_CHANGER_ACTIVE
LUN_VALIDATION_PENDING
LUN_VALIDATION_IN_PROGRESS
LUN_CLEAR_TEXT
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
53-1002721-01
Tape LUN states
Console String
Disabled (LUN not found)
Target Offline
Disabled (LUN not connected or
supported)
Disabled (Wrong device type
found)
Tape medium changer active
Tape validation pending
Tape validation in progress
Clear text
Encrypted LUN states
Explanation
No logical unit structure in tape
module. This is an internal software
error. If it occurs, contact Brocade
support.
Target port is not currently in the
fabric. Check connections and L2 port
state.
The target port is active, but this
particular Logical Unit is not
supported by that target. This
indicates a user configuration error.
The logical unit on target port is
active, but it is neither a tape or a
medium changer. This indicates a
user configuration error.
The logical unit is a medium changer,
fully ready to handle tapes.
The logical unit is either a tape drive
or an attached medium changer,
where changer and tape are on same
LUN. Since the last LOAD, REWIND, or
UNIT ATTENION, no host has
attempted to read or write to a tape in
this logical unit. There is no way of
knowing if a tape is still present, or
the encryption state of the tape.
A host can issue a READ or WRITE to
the logical unit. At that point, it can be
determined whether or not a tape is
present or needs to be mounted, and
whether or not data is ciphertext
(encrypted) or cleartext.
The tape module has received the
READ or WRITE command that
triggers the validation of tape
encryption mode, and is in the
process of figuring out if the mounted
tape medium is encrypted or not. This
state should only appear briefly.
The tape medium is present, and is in
clear text. The encryption switch or
blade has full read/write access,
because its current tape policy for the
medium is also clear text.
A
305

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os 7.1.0

Table of Contents