General Encryption Troubleshooting - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

Brocade fabric os encryption administrator's guide v7.1.0 (53-1002721-01, march 2013)
Hide thumbs Also See for StoreFabric SN6500B:
Table of Contents

Advertisement

General encryption troubleshooting

Table 9
provides additional information for failures you might encounter while configuring switches using
the CLI.
TABLE 9
General troubleshooting tips using the CLI
Command
supportsave
configshow
cfgshow
nsshow
switch:SecurityAdmin> cryptocfg --show
-groupcfg
switch:SecurityAdmin> cryptocfg --show
-groupmember -all
TABLE 10
General errors and conditions
Problem
Connection to a key vault returns a "Not Responding"
message.
LUN state for some LUNS remains in "initialize" state on the
passive path.
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
53-1002721-01
lists the commands you can use to check the health of your encryption setup.
Activity
Check whole system configuration.
Run RAS logs.
Run RAS traces.
Run Security Processor (SP) logs (mainly kpd.log).
Check whole system persistent configuration database dump.
Check for SPM-, CVLM-, and CNM-related persistent database entries.
Check for redirection zones starting with "red_xxx" in defined database for
virtual and physical devices.
Check for crypto virtual target and crypto virtual initiator entries for VT/VI
Check key vault connection status.
Check encryption group/cluster status.
Note: CONVERGED status means the cluster is formed successfully.
1
2
Resolution
Determine if the default port has been changed on the key vault.
This is expected behavior. The LUNs exposed through Passive paths of the
target array will be in either Initialize or LUN Discovery Complete state so long
as the paths remain in passive condition. When the passive path becomes
active, the LUN changes to Encryption Enabled. Use the --show -LUN
command with the -stat option to check the LUN state.

General encryption troubleshooting

Check encryption group/cluster member status.
Note: DISCOVERED state means the member is currently part of a cluster.
Check encryption engine/SP and KEK status.
Note: SP state ONLINE means encryption engine is enabled for
encryption with valid KEK (Link Key or Master Key).
6
Table 10
325

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os 7.1.0

Table of Contents