Brocade Communications Systems StoreFabric SN6500B Administrator's Manual page 297

1. Enter the following command on FOS1 to reclaim the VI/VT WWN base for the Brocade
2. Enter the following command to propagate the change throughout the EG:
3. Enter the following command in FOS1 to eject node FOS2 from the EG:
4. Enter the following command on FOS1 to deregister the ejected node from the encryption
5. Enter the following command on FOS2 to clean up the encryption configuration on the
6. Add FOS2 as a member node to EG2.
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
53-1002721-01
Moving an encryption switch from one EG to another in the same fabric
Encryption Switch to be moved out of EG1.
Admin:switch> cryptocfg --reclaimWWN -membernode <FOS1_WWN>
When prompted, answer yes.
Admin:switch> cryptocfg --commit
Admin:switch> cryptocfg --eject -membernode <FOS2-WWN>
group:
Admin:switch> cryptocfg --dereg -membernode <FOS2-WWN>
deregistered node:
Admin:switch> cryptocfg –-reclaimWWN –cleanup
When prompted, enter yes to each prompt.
6
349