Brocade Communications Systems StoreFabric SN6500B Administrator's Manual page 94

2
Adding target tape LUNs for encryption
FIGURE 51
4. Click Add.
FIGURE 52
5. Select a host from the Host list.
76
Encryption Target Tape LUNs dialog box
The Add Encryption Target Tape LUNs dialog box displays
storage device that are visible to hosts is displayed. LUNs are identified by the Host world wide
name, LUN number, Volume Label Prefix number, and Enable Write Early ACK and Enable Read
Ahead status. The LUN numbers may be different for different hosts.
Add Encryption Target Tape LUNs dialog box
Before you encrypt a LUN, you must select a host, then either discover LUNs that are visible to
the virtual initiator representing the selected host, or enter a range of LUN numbers to be
configured for the selected host.
(Figure 52). A table of all LUNs in the
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
53-1002721-01