Brocade Communications Systems StoreFabric SN6500B Administrator's Manual page 280

6
Management application encryption wizard troubleshooting
TABLE 12
Error recovery instructions for adding a switch to a new group (Continued)
Configuration task
Create a new master key (opaque key
vaults only)
Save the switch's public key
certificate to a file.
General errors related to the Configure Switch Encryption wizard
Table 13
switches using the Configure Switch Encryption wizard.
TABLE 13
General errors related to the Configure Switch Encryption wizard
Problem
Initialization fails on the encryption engine after the encryption
engine is zeroized.
Configuration Commit fails with message "Default zone set to all
access at one of nodes in EG."
332
Error description
A failure occurred while attempting to
create a new master key.
The switch's public key certificate could
not be saved to a file.
Note: Verify that the path name and the
file name that you are using are both
valid and that you have write
permissions for the file.
provides additional information for failures you might encounter while configuring
Instructions
1 Remove the switch from the group using the Group
Members tab on the Encryption Group Properties
dialog box.
2 Rerun the Configure Switch Encryption wizard for
the switch.
Manual Option:
1 Launch the Encryption Group Properties dialog box,
and click Security.
2 Click the Master Key Action button and select Create
New Master Key to generate a new master key.
1 Remove the switch from the group using the Group
Members tab on the Encryption Group Properties
dialog box.
2 Rerun the Configure Switch Encryption wizard for
the switch.
Manual Option:
1 Save the switch's public key certificate to a file using
the Switch Encryption Properties dialog box.
2 Follow the Key Vault instructions
Resolution
Reboot the switch.
Default zoning must be set to no access.
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
53-1002721-01