2
Creating a new encryption group
4. From the Configure Switch Encryption welcome screen, click Next to begin.
FIGURE 15
5. For this procedure, verify that Create a new encryption group containing just this switch is
42
The Designate Switch Membership dialog box displays
following options:
•
Create a new encryption group containing just the switch: Creates an encryption group for
the selected switch
•
Add this switch to an existing encryption group: Adds the selected switch to an encryption
group that already exists
Designate Switch Membership dialog box
selected, then click Next.
NOTE
If you are adding a switch to an encryption, refer to
page 50.
The Create a New Encryption Group dialog box displays
(Figure
15). The dialog box contains the
"Adding a switch to an encryption group"
(Figure
16).
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
on
53-1002721-01