Brocade Communications Systems StoreFabric SN6500B Administrator's Manual page 289

22. Register back the signed KAC CSR/Cert onto the new node using the following command.
23. Register the username and password on the new node with the same username and password
24. Check the EE state using the following command to ensure that the EE is online.
25. From the new Brocade Encryption Switch, invoke the following command to set the default
26. Invoke the following command on the new Brocade Encryption Switch.
27. Replace the FC Cables to the new Brocade Encryption Switch.
28. Invoke the cfgsave command on any switch in that fabric. The fabric configuration from the
29. Verify that defzone is set as no access.
30. If HA cluster membership for the old Brocade Encryption Switch was in place, move container
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
53-1002721-01
Admin:switch> cryptocfg --reg –KACcert
as those used by the other nodes in the EG (created on the HP SKM/ESKM appliance) using
the following command.
Admin:switch> cryptocfg --reg –KACLogin
Admin:switch> cryptocfg -–show –localEE
zone as allAccess so the configuration from the existing Fabric is pushed to the new Brocade
Encryption Switch.
Admin:switch> defzone –allaccess
Admin:switch> cfgsave
existing fabric will be merged into the new Brocade Encryption Switch.
movement to the new Brocade Encryption Switch using the following procedure.
a. Replace the old EE with the new EE using the following command on the group leader.
Admin:switch> cryptocfg –replace
b. Issue commit.
Admin:switch> cryptocfg --commit
c. Replace the HA cluster membership from the old EE to the new EE using the following
command on the group leader.
Admin:switch> cryptocfg –replace –haclustermember <HA cluster name> <WWN
of old Brocade Encryption Switch> <WWN of new Brocade Encryption Switch>
d. Issue commit.
Admin:switch> cryptocfg --commit
e. If "manual" failback was set on the HA cluster, user intervention will be required to
manually fail back the LUNs owned by the newly replaced Brocade Encryption Switch.
Brocade Encryption Switch removal and replacement
<WWN of Old BES>
6
<WWN of new BES>
341