Brocade Communications Systems StoreFabric SN6500B Administrator's Manual page 98

2
Tape LUN write early and read ahead
FIGURE 53
3. Select a target tape storage device from the table, then click LUNs.
FIGURE 54
4. In the Enable Write EarlyAck and Enable Read Ahead columns, when the table is populated,
5. Click OK.
6. Commit the changes on the related CryptoTarget container:
80
Encryption Targets dialog box
The Encryption Target Tape LUNs dialog box displays
Encryption Target Tape LUNs dialog box - Setting tape LUN read ahead and write early
you can set these features as desired for each LUN:
•
To enable write early for a specific tape LUN, select Enable Write Early Ack for that LUN.
•
To enable read ahead for a specific LUN, select Enable Read Ahead for that LUN.
•
To disable write early for a specific tape LUN, deselect Enable Write Early Ack for that LUN.
•
To disable read ahead for a specific LUN, deselect Enable Read Ahead for that LUN.
a. Select Configure > Encryption from the menu task bar to display the Encryption Center
dialog box (Refer to Figure 1
b. Select a group, switch, or engine from the Encryption Center Devices table that contains
the storage device to be configured, then select Group/Switch/Engine > Targets from the
menu task bar.
(Figure
on page 14).
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
54).
53-1002721-01