Creating A New Master Key - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

FIGURE 66
4. Choose the active or alternate master key for restoration, as appropriate.
5. Select A Recovery Set of Smart Cards as the Restore From location.
6. Insert the recovery card containing a share of the master key that was backed up earlier, and
7.
8. Click Restore.
9. Repeat
10. Click OK.

Creating a new master key

1. Select Configure > Encryption from the menu task bar to display the Encryption Center
2. Select a group from the Encryption Center Devices table, then select Group > Security from the
3. Select Create a New Master Key from the list.
4. Click Yes to proceed.
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
53-1002721-01
Select a Master Key to Restore (from a recovery set of smart cards) dialog box
wait for the card serial number to appear.
Enter the password that was used to create the card. After five unsuccessful attempts to enter
the correct password, the card becomes locked and unusable.
You are prompted to insert the next card, if needed.
step 6 through step 8
dialog box (Refer to Figure 1
menu task bar.
The Encryption Group Properties dialog box displays with the Security tab selected.
A warning dialog displays.
until all cards in the set have been read.
on page 14).
2
Master keys
95