Errors Related To Adding A Switch To A New Group - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

Errors related to adding a switch to a new group

Table 12
and describes how to troubleshoot them.
TABLE 12
Error recovery instructions for adding a switch to a new group
Configuration task
Initialize the switch
Create encryption group on the
switch
Register one or more key vaults
Enable the encryption engines
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
53-1002721-01
Management application encryption wizard troubleshooting
lists configuration task errors you might encounter while adding a switch to a new group,
Error description
Unable to initialize the switch due to an
error response from the switch.
The switch was not properly initialized
and was aborted because it is
unavailable.
A failure occurred while attempting to
create a new encryption group on the
switch.
A failure occurred while attempting to
register one or more key vaults for a
group on the switch.
A failure occurred while attempting to
enable encryption engines on the
switch.
Instructions
Diagnose the problem using standard switch CLI
commands.
Rerun the Configure Switch Encryption wizard for the
switch.
1 Click the Refresh button on the Configure Switch
Encryption dialog box to synchronize the data and
the database.
2 Rerun the Configure Switch Encryption wizard for
the switch.
1 Remove the switch from the group using the Group
Members tab on the Encryption Group Properties
dialog box.
2 Rerun the Configure Switch Encryption wizard for
the switch.
Manual Option:
1 Launch the Encryption Group Properties dialog box
and click the General tab.
2 From the General dialog box, click Load from File to
install key vault certificates, and then click OK to
save the information on to the switch.
3 Follow the Key Vault instructions.
1 Remove the switch from the group using the Group
Members tab on the Encryption Group Properties
dialog box.
2 Rerun the Configure Switch Encryption wizard for
the switch.
Manual Option:
1 Launch the Switch Encryption Properties dialog box.
2 Save the switch's public key certificate to a file using
the Switch Encryption Properties dialog box.
3 Follow the Key Vault instructions for the key vault.
6
331